The FSR Pour Pan is the answer to floor box
installations that are on grade. If your application is a poured concrete
floor, but the box may rest on soil, rock, gravel, etc., you must first
install the Pour Pan. The Pour Pan is set into
the grade below the floor box and allows concrete to flow around and
under the box to prevent the floor box from contacting the grade. The
unit comes with extended length leveling feet, and the unique “pan
wings” prevent the pan from shifting during the pour.
The Pour Pan is available in two depths, and
you select the depth based on the thickness of the pour and the depth
of the floor box to be installed.
The pan is designed to provide a minimum of approximately 2” of
concrete under the box. Select which model pan is used based on structural
and site requirements.
Click on the icon to check out FSR BIM objects!
ORDERING ADVICE:
A simple formula for selecting the proper Pour Pan:
Depth of Box + 2 minus the depth of the pour = Pour Pan model.
Example: Installing a 4” deep floor box
into a 4” concrete slab. (4+2) - 4 = 2. The proper model would be
the FL-GRD2.
Example: Installing a 6” deep floor box into a 5” concrete slab. (6+2) - 5 = 3 (round up to 4).
The proper model would be the FL-GRD4.
Compatible FSR FLoor Boxes:
