FSR When Performance Counts 800-332-3771
Audio Switchers and Products
Control Products
Ceiling Enclosures
Floor Boxes
Table Boxes
Wall Boxes
Cables-Plates-Connectors-Mounts
IntelliTools
Interfaces
Power Products
Twisted Pair
Matrix Switches
Video Switchers and Scalers
Product Configuration Tools
Distribution Amps .png)
Audio
ADA-4
The ADA-4 is a one input, four output stereo/mono audio distribution amplifier.
The ADA-4 is a one input, four output stereo/mono audio distribution amplifier.
SADA-4/6
With 1 input and 4 or 6 outputs, the SADA series of audio distribution amplifiers can be configured for stereo or mono operation with a flip of a switch.
With 1 input and 4 or 6 outputs, the SADA series of audio distribution amplifiers can be configured for stereo or mono operation with a flip of a switch.
CDA-2EQA
The FSR CDA-2EQA is a high resolution 1 X 2 Distribution Amplifier designed to satisfy a typical application where a local monitor and a remote display device requiring a long cable run and audio.
The FSR CDA-2EQA is a high resolution 1 X 2 Distribution Amplifier designed to satisfy a typical application where a local monitor and a remote display device requiring a long cable run and audio.
CDA-2EQ
The FSR CDA-2EQA is a high resolution 1 X 2 Distribution Amplifier designed to satisfy a typical application where a local monitor and a remote display device requiring a long cable run and audio.
The FSR CDA-2EQA is a high resolution 1 X 2 Distribution Amplifier designed to satisfy a typical application where a local monitor and a remote display device requiring a long cable run and audio.
CVD-144
The world's first configurable Distribution Amplifier (D/A). Four independent 1 x 4 D/A's are integrated within the 1RU chassis. What makes the CVD-144 unique is the ability to bridge adjacent 1x4 blocks to make a larger D/A.
The world's first configurable Distribution Amplifier (D/A). Four independent 1 x 4 D/A's are integrated within the 1RU chassis. What makes the CVD-144 unique is the ability to bridge adjacent 1x4 blocks to make a larger D/A.
CVD-2EQ
The CVD-2EQA is a 1 in 2 out Composite Video DA with cable equalization on each output and 100 MHz of video bandwidth.
The CVD-2EQA is a 1 in 2 out Composite Video DA with cable equalization on each output and 100 MHz of video bandwidth.
CVD-2EQA
The CVD-2EQA is a 1 in 2 out Composite Video and Stereo Audio DA with cable equalization on each output and 100 MHz of video bandwidth.
The CVD-2EQA is a 1 in 2 out Composite Video and Stereo Audio DA with cable equalization on each output and 100 MHz of video bandwidth.
VDA-4
The VDA-4 is a 1x4 Distribution Amplifier which provides a convenient method to distribute one composite video and one line level stereo audio signal to four AV output devices such as projecors, monitors and audio amps.
The VDA-4 is a 1x4 Distribution Amplifier which provides a convenient method to distribute one composite video and one line level stereo audio signal to four AV output devices such as projecors, monitors and audio amps.
VDA-4A
The VDA-4A is a 1x4 Distribution Amplifier which provides a convenient method to distribute one composite video and one line level stereo audio signal (VDA-4A) to four AV output devices such as projecors, monitors and audio amps (VDA-4A).
The VDA-4A is a 1x4 Distribution Amplifier which provides a convenient method to distribute one composite video and one line level stereo audio signal (VDA-4A) to four AV output devices such as projecors, monitors and audio amps (VDA-4A).
SVD-2EQ
The SVD-2EQA is a 1 in 2 out S – Video DA with cable equalization on each output and 100 MHz of video bandwidth.
The SVD-2EQA is a 1 in 2 out S – Video DA with cable equalization on each output and 100 MHz of video bandwidth.
SVD-2EQA
The SVD-2EQA is a 1 in 2 out S – Video and Stereo Audio
DA with cable equalization on each output and 100 MHz
of video bandwidth.
The SVD-2EQA is a 1 in 2 out S – Video and Stereo Audio
DA with cable equalization on each output and 100 MHz
of video bandwidth.
YUV-6
The all new YUV-6 is a ultra high resolution, ultra high bandwidth, one input by six outputs, distribution amplifier suitable for applications requiring the highest possible video and audio quality.
The all new YUV-6 is a ultra high resolution, ultra high bandwidth, one input by six outputs, distribution amplifier suitable for applications requiring the highest possible video and audio quality.
YUV-6
The all new YUV-6 is a ultra high resolution, ultra high bandwidth, one input by six outputs, distribution amplifier suitable for applications requiring the highest possible video and audio quality.
The all new YUV-6 is a ultra high resolution, ultra high bandwidth, one input by six outputs, distribution amplifier suitable for applications requiring the highest possible video and audio quality.
RGB-4
The all new RGB - 4 is an ultra high resolution, ultra high bandwidth 1 x 4 video distribution amplifiers suitable for applications requiring the highest possible video quality.
The all new RGB - 4 is an ultra high resolution, ultra high bandwidth 1 x 4 video distribution amplifiers suitable for applications requiring the highest possible video quality.
RGB-6
The all new RGB-6 are ultra high resolution, ultra high bandwidth 1 x 6 video distribution amplifiers suitable for applications requiring the highest possible video quality.
The all new RGB-6 are ultra high resolution, ultra high bandwidth 1 x 6 video distribution amplifiers suitable for applications requiring the highest possible video quality.
CDA-2
The CDA-2 is a computer video distribution amplifier. It takes the input signal from the video card of a computer and splits it to be used by a projector and a monitor.
The CDA-2 is a computer video distribution amplifier. It takes the input signal from the video card of a computer and splits it to be used by a projector and a monitor.
CDA-4
The CDA-4 takes the input signal from the video card of a computer and splits it to be used by up to 4 projectors and or monitors.
The CDA-4 takes the input signal from the video card of a computer and splits it to be used by up to 4 projectors and or monitors.
CDA-6
The CDA-6 takes the input signal from the video card of a computer and splits it to be used by up to 6 projectors and or monitors.
The CDA-6 takes the input signal from the video card of a computer and splits it to be used by up to 6 projectors and or monitors.
CDA-2EQG
Our new enhanced CDA-2EQG high resolution 1 X 2 Distribution Amplifier is designed to satisfy typical applications requiring a local monitor and a remote display device with a long cable run.
Our new enhanced CDA-2EQG high resolution 1 X 2 Distribution Amplifier is designed to satisfy typical applications requiring a local monitor and a remote display device with a long cable run.
CDA-2EQGA
Our new enhanced CDA-2EQGA high resolution 1 X 2 Distribution Amplifier is designed to satisfy typical applications requiring a local monitor and a remote display device with a long cable run.
Our new enhanced CDA-2EQGA high resolution 1 X 2 Distribution Amplifier is designed to satisfy typical applications requiring a local monitor and a remote display device with a long cable run.
RGB-4
The all new RGB - 4 is an ultra high resolution, ultra high bandwidth 1 x 4 video distribution amplifiers suitable for applications requiring the highest possible video quality.
The all new RGB - 4 is an ultra high resolution, ultra high bandwidth 1 x 4 video distribution amplifiers suitable for applications requiring the highest possible video quality.
RGB-6
The all new RGB-6 are ultra high resolution, ultra high bandwidth 1 x 6 video distribution amplifiers suitable for applications requiring the highest possible video quality.
The all new RGB-6 are ultra high resolution, ultra high bandwidth 1 x 6 video distribution amplifiers suitable for applications requiring the highest possible video quality.
RGB-144
The world's first configurable Distribution Amplifier (D/A). Four independent 1 x 4 D/A's are integrated within the 3RU chassis. What makes the RGB-144 unique is the ability to bridge adjacent 1x4 blocks to make a larger D/A.
The world's first configurable Distribution Amplifier (D/A). Four independent 1 x 4 D/A's are integrated within the 3RU chassis. What makes the RGB-144 unique is the ability to bridge adjacent 1x4 blocks to make a larger D/A.
RGB-HV2
The RGB-HV-2 is an ultra high resolution, ultra high bandwidth 1x2 distribution amplifier for applications requiring the highest possible video quality.
The RGB-HV-2 is an ultra high resolution, ultra high bandwidth 1x2 distribution amplifier for applications requiring the highest possible video quality.
DV-HDA-12
The DV-HDA-12, HDMI Distribution Amplifier, allows one HDMI source such as a BLu-ray, Set-top Box, or PC to be sent to two digital displays.
The DV-HDA-12, HDMI Distribution Amplifier, allows one HDMI source such as a BLu-ray, Set-top Box, or PC to be sent to two digital displays.
DV-HDA-15
The DV-HDA-15, HDMI Distribution Amplifier, allows one HDMI source such as a Blu-ray, Set-top Box, or PC to be sent to five digital displays.
The DV-HDA-15, HDMI Distribution Amplifier, allows one HDMI source such as a Blu-ray, Set-top Box, or PC to be sent to five digital displays.
DV-HSW-41
The DV-HSW-41, is a 4 x 1 HDMI Remote controllable switcher. It can be easily controlled by the front panel button, IR via the provided remote or RS-232.
The DV-HSW-41, is a 4 x 1 HDMI Remote controllable switcher. It can be easily controlled by the front panel button, IR via the provided remote or RS-232.
DV-HMSW-88
The FSR DV-HMSW-88 HDMI matrix switcher carries with it the results of more field experience than any other digital video product in the market.
The FSR DV-HMSW-88 HDMI matrix switcher carries with it the results of more field experience than any other digital video product in the market.
DV-HXT-1
The DV-HXT-1 converts between HDMI and CAT-5e / CAT-6. It uses one CAT-5e / CAT-6 cables to extend a high definition display far away from its HDMI source.
The DV-HXT-1 converts between HDMI and CAT-5e / CAT-6. It uses one CAT-5e / CAT-6 cables to extend a high definition display far away from its HDMI source.
DV-HXT-2
The DV-HXT-2 converts HDMI to two CAT-x cable for simplified installations and lower cabling cost.
The DV-HXT-2 converts HDMI to two CAT-x cable for simplified installations and lower cabling cost.
DV-MFSW-94
The DV-MFSW-94 is a hybrid matrix switcher that allows both analog and digital video sources to be reliably routed to as many as four digital displays.
The DV-MFSW-94 is a hybrid matrix switcher that allows both analog and digital video sources to be reliably routed to as many as four digital displays.